News and Announcements

Completed projects, certification announcements and technical articles on structural steel.

Technical articles on structural steel, welding technology, corrosion protection, erection tolerances and cost management; plus completed project news and certification announcements.

Published articles: 14
News: 4
Announcement: 2
Technical Article: 8

Technical Article 22 September 20264 min read

Steel connection design: bolted or welded?

The cost of a steel structure is decided not in its sections but in its connections. The same structural solution can come out twenty p…

Technical Article 18 August 20264 min read

Crane runway beam design: fatigue, tolerance and execution class

The crane runway beam is the hardest-working member in an industrial building. While every other load-bearing element is loaded a few h…

News 28 July 20261 min read

1,710 tonnes of steelwork completed at the Antalya Expo Centre

The steel load-bearing system of the Antalya Expo Centre, one of Türkiye's foremost international event venues, has been completed with…

News 26 July 20261 min read

Steelwork of the COP31 Green Zone fabricated and erected

The steel load-bearing systems of the Green Zone created for the COP31 United Nations Climate Change Conference have been completed wit…

Technical Article 14 July 20263 min read

Erection tolerances: what is measured on site under EN 1090-2?

An erection error rarely appears all at once. Deviations of a few millimetres accumulate bay by bay and show up at one end of the struc…

Technical Article 30 June 20263 min read

Steel take-off and pricing: what drives the rate per tonne?

Price in structural steel is discussed per tonne, but tonnage is only one input to cost. The same 500 tonnes can produce a difference o…

Technical Article 11 June 20262 min read

Steel or reinforced concrete for an industrial investment?

The question is usually asked in terms of cost, yet what is decisive is span, schedule and how the building will change in the future.

Technical Article 26 May 20263 min read

Fire protection for steel: which method, at what cost?

Steel does not burn, but it heats. Above five hundred degrees it loses half its yield strength, which is why fire protection has to be …

Technical Article 9 April 20262 min read

Corrosion protection in steel structures: selecting a coating system to ISO 12944

Corrosion protection in steel structures begins not with coating thickness but with reading the environment correctly. A wrongly chosen…

Technical Article 17 February 20262 min read

EN 1090-2 execution classes: what are EXC1, EXC2, EXC3 and EXC4?

The execution class is the single most fundamental decision governing how a steel structure will be fabricated. Getting it wrong affect…

News 4 November 20251 min read

1,350 tonnes of steel load-bearing system at the King Abdullah Stadium in Jeddah

On the King Abdullah Stadium project in Jeddah, Saudi Arabia, the stadium's load-bearing frames and vast roof steelwork were fabricated…

News 6 May 20251 min read

260-tonne pipe bridge handed over at the TAMEK Salihli factory

Fabrication and erection of a 260-tonne pipe bridge for the TAMEK tomato paste factory in Salihli, Manisa have been completed.

Announcement 25 March 20251 min read

Our EN 1090 and EN ISO 3834-2 certificates have been renewed

The Factory Production Control certificate for our structural steelwork fabrication and our fusion welding quality requirements certifi…

Announcement 24 March 20251 min read

Fabrication and erection continue at the Habaş Cold Rolling Mill Building

The Habaş Cold Rolling Mill Building continues to rise with 3,437 tonnes of steel. The project aims to make a significant contribution …

Request a Quote for Your Project

Fabrication drawings, a tonnage list or a preliminary design is enough. We review the scope and respond with a schedule and pricing.

Request a quote